Page 1 of 1

Falcon 360 E74

Posted: Sat Oct 24, 2009 6:03 pm
by pluto_00
Hey guys,

360 falcon box just had red light error code is 1022 ==> E74

Av switch not working... Whats best procedure you should recommend to do ?

I though
First conform if it is still in warrenty
Second call MS and see what they say ... to send it in or so OR would it be better just to take it back to the shop it came from?

If it is out of warrenty ... are there X-clamp fix kits still availeble?

if the x-clamp doesn't work... I should buy a Arcade and put the HD on it from the other one.
But about buying that new one ...
I know what to look for for getting a Jasper ... but is there already a way in telling what lite-on drive it has ?

If the warrenty seals stay intact is it wise to switch the insides en return the new bought one with the inside of the broken elite one ? Or is this not to be recommended ?

thnx

Re: Falcon 360 E74

Posted: Sat Oct 24, 2009 10:19 pm
by HaGGardSmurf
pluto_00 wrote: If it is out of warrenty ... are there X-clamp fix kits still availeble?
Yea, lots on ebay, I just bought a bulk 200/400/400 kit.
pluto_00 wrote: I know what to look for for getting a Jasper ... but is there already a way in telling what lite-on drive it has ?
The only way to see what type of drive is the wires, so you can only tell if its a lite-on benQ etc... (You can always check the MFR.)
pluto_00 wrote: If the warrenty seals stay intact is it wise to switch the insides en return the new bought one with the inside of the broken elite one ? Or is this not to be recommended ?
Gut Swapping? Do it at your own risk.

Re: Falcon 360 E74

Posted: Sun Oct 25, 2009 4:56 am
by pluto_00
pluto_00 wrote: I know what to look for for getting a Jasper ... but is there already a way in telling what lite-on drive it has ?
The only way to see what type of drive is the wires, so you can only tell if its a lite-on benQ etc... (You can always check the MFR.)

So there is no telling what drive it has from the outside of te box ?

Re: Falcon 360 E74

Posted: Sun Oct 25, 2009 7:45 am
by Shootsteel
Look for a Pre June 2009 which you can see by looking in the window at the back of the box and you will 99% have a 7000 series lite on

Re: Falcon 360 E74

Posted: Sun Oct 25, 2009 2:04 pm
by pluto_00
Shootsteel wrote:Look for a Pre June 2009 which you can see by looking in the window at the back of the box and you will 99% have a 7000 series lite on
thnx man !