Hi,
I was trying to upgrade my Benq VAD6038 and I was seeing it in JF 1.66 and all. It had already been flashed (1.4 I think) and when I tried to erase it to reflash with ix161 the pc hung and now it is not showing in JF. Is there any way of recovering from this situation, or am I looking at a dead xbox? What are my options, if any?
Dead Benq?
-
djshauny1
- Possible Ally of Robinhood
- Posts: 968
- Joined: Fri Jul 24, 2009 6:07 am
- Location: Somewhere in the forest
Re: Dead Benq?
Ok
Do u still have the firmware from the drive?
If so ill walk u down the iprep recovery method
DJ
Do u still have the firmware from the drive?
If so ill walk u down the iprep recovery method
DJ
Re: Dead Benq?
Unfortunately not.....might be able to get it though from the guy who flashed it. Im not sure it is dead though,
Im getting a drive being found in JF in vendor mode and the following...
Serial flash found with Status 0x73
Sending Device ID request to port 0x8400
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
not sure what this is, any ideas?
Im getting a drive being found in JF in vendor mode and the following...
Serial flash found with Status 0x73
Sending Device ID request to port 0x8400
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
not sure what this is, any ideas?
Re: Dead Benq?
What program is used for upgrading an already flashed Benq drive,.....iprep? and is there a tutorial?
I can see a tutorial for new drives allright.
I can see a tutorial for new drives allright.
-
HaGGardSmurf
- Ally of Robinhood
- Posts: 4088
- Joined: Tue Feb 03, 2009 9:46 am
- Location: Alberta, Canada
Re: Dead Benq?
Well thats weird, seems your drive is in vendor mode, from what you pasted...
Try flashing the drive in jungle, DO NOT erase... BenQ's hitachi's and samsung's do not need to be erased (benq's and sammy's are erased just before they are flashed, and it is done by JF/iPrep)
Try flashing the drive in jungle, DO NOT erase... BenQ's hitachi's and samsung's do not need to be erased (benq's and sammy's are erased just before they are flashed, and it is done by JF/iPrep)
Re: Dead Benq?
Hi Haggard,
thanks for thr repkly......That would comply with what I saw happen.....I sent benq unlock command and then tried to read the fw and it hung the whole pc....no mouse,nothing. I then had to reboot the pc and when I did I could see the drive and it reported vendor mode but It would not read the fw off it. I have kinda resigned myself to the loss but cant help wondering if there is some program I dont know of which might recover the situation. It only got to the first dot of the "reading bank 1" mesage before iy happened. I now suspect that my VIA card is the culprit or else the connectivity kit. I since tried to do a liteon and got a similar hanging, but he liteons are more robust and dont seem to die as easy ,tg.
I read somewhere about disabeling the via drivers in device manager as a solution...is that an idea worth trying? Also is windows 7 good for flashing, or is it a no no.
thanks for thr repkly......That would comply with what I saw happen.....I sent benq unlock command and then tried to read the fw and it hung the whole pc....no mouse,nothing. I then had to reboot the pc and when I did I could see the drive and it reported vendor mode but It would not read the fw off it. I have kinda resigned myself to the loss but cant help wondering if there is some program I dont know of which might recover the situation. It only got to the first dot of the "reading bank 1" mesage before iy happened. I now suspect that my VIA card is the culprit or else the connectivity kit. I since tried to do a liteon and got a similar hanging, but he liteons are more robust and dont seem to die as easy ,tg.
I read somewhere about disabeling the via drivers in device manager as a solution...is that an idea worth trying? Also is windows 7 good for flashing, or is it a no no.