ben-q stuck in vendor mode
- lcddarkangel1
- Board Warrior
- Posts: 258
- Joined: Wed Mar 11, 2009 6:42 pm
- Location: MILITARY APO
- Contact:
-
- Bandit
- Posts: 96
- Joined: Mon May 11, 2009 12:52 pm
Re: ben-q stuck in vendor mode
Are you going to do any more drives?
I have one to do tomorrow probably and I'd be interested to hear if you get on better with the earlier version and I will use that too.
I have one to do tomorrow probably and I'd be interested to hear if you get on better with the earlier version and I will use that too.

_\*/*\HyperDrive/*\*/_
Re: ben-q stuck in vendor mode
I had those same errors with jungleflasher when I ran my VIA card with the drivers enabled. I disabled them and it's worked great ever since for me.
Sadalius
No questions by PM please
No questions by PM please
-
- Bandit
- Posts: 96
- Joined: Mon May 11, 2009 12:52 pm
Re: ben-q stuck in vendor mode
I was going to give that a try also but was thinking it was just for liteons.
I'll try it out tomorrow, see how it goes.
I'll try it out tomorrow, see how it goes.

_\*/*\HyperDrive/*\*/_
Re: ben-q stuck in vendor mode
well
you need to remember that the benq and the lite-on
are made by the same people
I dont think you should jungle with any drive with the via drivers running.
im not up on jungle as i just dont use it much.
but
when i do it is on a pc that does not have a via chipset and i have never had any error like that
you need to remember that the benq and the lite-on
are made by the same people
I dont think you should jungle with any drive with the via drivers running.
im not up on jungle as i just dont use it much.
but
when i do it is on a pc that does not have a via chipset and i have never had any error like that
- lcddarkangel1
- Board Warrior
- Posts: 258
- Joined: Wed Mar 11, 2009 6:42 pm
- Location: MILITARY APO
- Contact:
Re: ben-q stuck in vendor mode
not doing anymore tonight.
i have to do 4 boxes on saturday.
i have been using JF 1.55 with no issues.
i have to do 4 boxes on saturday.
i have been using JF 1.55 with no issues.
- lcddarkangel1
- Board Warrior
- Posts: 258
- Joined: Wed Mar 11, 2009 6:42 pm
- Location: MILITARY APO
- Contact:
Re: ben-q stuck in vendor mode
i dont use the via card.
my mother board has 4 sata ports on it already.
i do have a card but i only use it on sammy drives.
my mother board has 4 sata ports on it already.
i do have a card but i only use it on sammy drives.
-
- Bandit
- Posts: 96
- Joined: Mon May 11, 2009 12:52 pm
Re: ben-q stuck in vendor mode
so you never used the VIA when you got the error, hmm.
I did
I did

_\*/*\HyperDrive/*\*/_
- lcddarkangel1
- Board Warrior
- Posts: 258
- Joined: Wed Mar 11, 2009 6:42 pm
- Location: MILITARY APO
- Contact:
-
- Bandit
- Posts: 96
- Joined: Mon May 11, 2009 12:52 pm
Re: ben-q stuck in vendor mode
Ok, so I successfully flashed another Benq,
same procedure as before,
apart from I tried disabling the VIA Drivers and my PC was freezing everytime the xbox drive powered on,
so I re-enabled the drivers got the "write verify failed" error, continued on my merry way, pressed outro/reset, set it all up, inserted backup and it boots fine.
I'm not sure if this is an issue with my setup or a JF bug but either way I just want to confirm both worked even though it gave the verification error.
Seems strange, and I would encourage anyone with the same or similar issue to seek advice on what to do from one of the experienced guys here, rather than just doing as I have done, I may have just got lucky. If iPrep is an option for you then by all means try that if it makes you feel safer.
same procedure as before,
apart from I tried disabling the VIA Drivers and my PC was freezing everytime the xbox drive powered on,
so I re-enabled the drivers got the "write verify failed" error, continued on my merry way, pressed outro/reset, set it all up, inserted backup and it boots fine.
I'm not sure if this is an issue with my setup or a JF bug but either way I just want to confirm both worked even though it gave the verification error.
Seems strange, and I would encourage anyone with the same or similar issue to seek advice on what to do from one of the experienced guys here, rather than just doing as I have done, I may have just got lucky. If iPrep is an option for you then by all means try that if it makes you feel safer.

_\*/*\HyperDrive/*\*/_
- lcddarkangel1
- Board Warrior
- Posts: 258
- Joined: Wed Mar 11, 2009 6:42 pm
- Location: MILITARY APO
- Contact:
-
- Bandit
- Posts: 96
- Joined: Mon May 11, 2009 12:52 pm
Re: ben-q stuck in vendor mode
This info is good for others to reference against if they have the same error.

_\*/*\HyperDrive/*\*/_
- lcddarkangel1
- Board Warrior
- Posts: 258
- Joined: Wed Mar 11, 2009 6:42 pm
- Location: MILITARY APO
- Contact:
Re: ben-q stuck in vendor mode
have you tryied playing live with backup copies to make sure its all good?
-
- Bandit
- Posts: 96
- Joined: Mon May 11, 2009 12:52 pm
- lcddarkangel1
- Board Warrior
- Posts: 258
- Joined: Wed Mar 11, 2009 6:42 pm
- Location: MILITARY APO
- Contact:
Re: ben-q stuck in vendor mode
so my computer crashed today.
after reformating it again and reloading all the programs i needed. it made it a lot easier to flash boxes.
did 6 boxes today.
with no issues at all.
after reformating it again and reloading all the programs i needed. it made it a lot easier to flash boxes.
did 6 boxes today.
with no issues at all.