ben-q stuck in vendor mode

The place for more technical questions about modding your Xbox 360!
User avatar
lcddarkangel1
Board Warrior
Board Warrior
Posts: 258
Joined: Wed Mar 11, 2009 6:42 pm
Location: MILITARY APO
Contact:

Re: ben-q stuck in vendor mode

Post by lcddarkangel1 »

im going back to JF 1.55
Image

Image
hyperdrive
Bandit
Bandit
Posts: 96
Joined: Mon May 11, 2009 12:52 pm

Re: ben-q stuck in vendor mode

Post by hyperdrive »

Are you going to do any more drives?

I have one to do tomorrow probably and I'd be interested to hear if you get on better with the earlier version and I will use that too.
Image
_\*/*\HyperDrive/*\*/_
sadalius
Robinhood
Robinhood
Posts: 4039
Joined: Wed Nov 07, 2007 6:06 pm

Re: ben-q stuck in vendor mode

Post by sadalius »

I had those same errors with jungleflasher when I ran my VIA card with the drivers enabled. I disabled them and it's worked great ever since for me.
Sadalius

No questions by PM please
hyperdrive
Bandit
Bandit
Posts: 96
Joined: Mon May 11, 2009 12:52 pm

Re: ben-q stuck in vendor mode

Post by hyperdrive »

I was going to give that a try also but was thinking it was just for liteons.

I'll try it out tomorrow, see how it goes.
Image
_\*/*\HyperDrive/*\*/_
User avatar
CoFree
Robinhood
Robinhood
Posts: 13414
Joined: Wed Nov 07, 2007 1:38 pm
Location: In the Forest
Contact:

Re: ben-q stuck in vendor mode

Post by CoFree »

well
you need to remember that the benq and the lite-on
are made by the same people

I dont think you should jungle with any drive with the via drivers running.
im not up on jungle as i just dont use it much.

but
when i do it is on a pc that does not have a via chipset and i have never had any error like that
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
Image
No Questions by PM.
User avatar
lcddarkangel1
Board Warrior
Board Warrior
Posts: 258
Joined: Wed Mar 11, 2009 6:42 pm
Location: MILITARY APO
Contact:

Re: ben-q stuck in vendor mode

Post by lcddarkangel1 »

not doing anymore tonight.
i have to do 4 boxes on saturday.

i have been using JF 1.55 with no issues.
Image

Image
User avatar
lcddarkangel1
Board Warrior
Board Warrior
Posts: 258
Joined: Wed Mar 11, 2009 6:42 pm
Location: MILITARY APO
Contact:

Re: ben-q stuck in vendor mode

Post by lcddarkangel1 »

i dont use the via card.
my mother board has 4 sata ports on it already.
i do have a card but i only use it on sammy drives.
Image

Image
hyperdrive
Bandit
Bandit
Posts: 96
Joined: Mon May 11, 2009 12:52 pm

Re: ben-q stuck in vendor mode

Post by hyperdrive »

so you never used the VIA when you got the error, hmm.

I did
Image
_\*/*\HyperDrive/*\*/_
User avatar
lcddarkangel1
Board Warrior
Board Warrior
Posts: 258
Joined: Wed Mar 11, 2009 6:42 pm
Location: MILITARY APO
Contact:

Re: ben-q stuck in vendor mode

Post by lcddarkangel1 »

i will see how everything turns out on saturday.
got 4 boxes to do.
Image

Image
hyperdrive
Bandit
Bandit
Posts: 96
Joined: Mon May 11, 2009 12:52 pm

Re: ben-q stuck in vendor mode

Post by hyperdrive »

Ok, so I successfully flashed another Benq,

same procedure as before,

apart from I tried disabling the VIA Drivers and my PC was freezing everytime the xbox drive powered on,

so I re-enabled the drivers got the "write verify failed" error, continued on my merry way, pressed outro/reset, set it all up, inserted backup and it boots fine.

I'm not sure if this is an issue with my setup or a JF bug but either way I just want to confirm both worked even though it gave the verification error.

Seems strange, and I would encourage anyone with the same or similar issue to seek advice on what to do from one of the experienced guys here, rather than just doing as I have done, I may have just got lucky. If iPrep is an option for you then by all means try that if it makes you feel safer.
Image
_\*/*\HyperDrive/*\*/_
User avatar
lcddarkangel1
Board Warrior
Board Warrior
Posts: 258
Joined: Wed Mar 11, 2009 6:42 pm
Location: MILITARY APO
Contact:

Re: ben-q stuck in vendor mode

Post by lcddarkangel1 »

not really sure why it does that.
Image

Image
hyperdrive
Bandit
Bandit
Posts: 96
Joined: Mon May 11, 2009 12:52 pm

Re: ben-q stuck in vendor mode

Post by hyperdrive »

This info is good for others to reference against if they have the same error.
Image
_\*/*\HyperDrive/*\*/_
User avatar
lcddarkangel1
Board Warrior
Board Warrior
Posts: 258
Joined: Wed Mar 11, 2009 6:42 pm
Location: MILITARY APO
Contact:

Re: ben-q stuck in vendor mode

Post by lcddarkangel1 »

have you tryied playing live with backup copies to make sure its all good?
Image

Image
hyperdrive
Bandit
Bandit
Posts: 96
Joined: Mon May 11, 2009 12:52 pm

Re: ben-q stuck in vendor mode

Post by hyperdrive »

yeah, alls fine, played multiplayer HAWX
Image
_\*/*\HyperDrive/*\*/_
User avatar
lcddarkangel1
Board Warrior
Board Warrior
Posts: 258
Joined: Wed Mar 11, 2009 6:42 pm
Location: MILITARY APO
Contact:

Re: ben-q stuck in vendor mode

Post by lcddarkangel1 »

so my computer crashed today.
after reformating it again and reloading all the programs i needed. it made it a lot easier to flash boxes.

did 6 boxes today.
with no issues at all.
Image

Image
Post Reply

Return to “360 DVD Drive Flashing”