benq drive upgrade

The place for more technical questions about modding your Xbox 360!
Post Reply
jakehungar
Peasant
Peasant
Posts: 6
Joined: Tue May 19, 2009 11:49 pm

benq drive upgrade

Post by jakehungar »

I have a benq drive that had an old firmware the was modded in dos . now I have a new pc and bought a connector kit . can i used jungle flasher and upgrade it without bricking it? i had read jungle flasher pdf file do i just mod it as it was a stock drive? or do i need to do a restores like everyone here said in the forum?
User avatar
technoe
Ally of Robinhood
Ally of Robinhood
Posts: 1767
Joined: Wed Jan 14, 2009 2:30 pm
Location: Clarksville, TN

Re: benq drive upgrade

Post by technoe »

Well I don't know who said you had to restore a Benq, but they must've been mistaken. Benq's are among the easiest drives to mod. You can read/write the firmware pretty much at will. Jungle Flasher will only work on specific chipsets but if like most of us you've purchased a VIA 6421A or 6421L model Sata Raid Card you'll be fine using JF. Benqs are really quick when using JF. Here's the Video Tutorial section.
http://www.robinhoodsplayground.com/for ... .php?f=195" onclick="window.open(this.href);return false;
Take a quick look over this and let us know if you have any more questions.
Image
Today Money, Tomorrow the WORLD!!
User avatar
commando_lee
Ally of Robinhood
Ally of Robinhood
Posts: 1821
Joined: Sun Apr 26, 2009 12:50 pm
Location: Up high in the tree looking out for the Sheriff of Nottingham

Re: benq drive upgrade

Post by commando_lee »

yeah you can use JF to upgrade it, but i would advise on doing it with IPREP.

this is a link to a tutorial which our leader put together by far the best thats around.

http://www.robinhoodsplayground.com/for ... 195&t=5129" onclick="window.open(this.href);return false;

you can get iprep from the link below

viewtopic.php?f=112&t=48" onclick="window.open(this.href);return false;

anything else you need just post up
................................................................RobinHoods Very Own
.......................................Image
I do this for the fun and pleasure in helping people. But this is NOT my job. Post up on the boards with your question and some body will help you dont use the PM system.
User avatar
commando_lee
Ally of Robinhood
Ally of Robinhood
Posts: 1821
Joined: Sun Apr 26, 2009 12:50 pm
Location: Up high in the tree looking out for the Sheriff of Nottingham

Re: benq drive upgrade

Post by commando_lee »

technoe wrote:Well I don't know who said you had to restore a Benq, but they must've been mistaken. Benq's are among the easiest drives to mod. You can read/write the firmware pretty much at will. Jungle Flasher will only work on specific chipsets but if like most of us you've purchased a VIA 6421A or 6421L model Sata Raid Card you'll be fine using JF. Benqs are really quick when using JF. Here's the Video Tutorial section.
http://www.robinhoodsplayground.com/for ... .php?f=195" onclick="window.open(this.href);return false;
Take a quick look over this and let us know if you have any more questions.

sorry mate wernt jumpin in we posted up at same time
................................................................RobinHoods Very Own
.......................................Image
I do this for the fun and pleasure in helping people. But this is NOT my job. Post up on the boards with your question and some body will help you dont use the PM system.
User avatar
technoe
Ally of Robinhood
Ally of Robinhood
Posts: 1767
Joined: Wed Jan 14, 2009 2:30 pm
Location: Clarksville, TN

Re: benq drive upgrade

Post by technoe »

It's cool Commando, I just posted a link to the Tuts section.
Image
Today Money, Tomorrow the WORLD!!
Post Reply

Return to “360 DVD Drive Flashing”