Interesting BenQ Flash...

The place for more technical questions about modding your Xbox 360!
Post Reply
User avatar
HaGGardSmurf
Ally of Robinhood
Ally of Robinhood
Posts: 4088
Joined: Tue Feb 03, 2009 9:46 am
Location: Alberta, Canada

Interesting BenQ Flash...

Post by HaGGardSmurf »

I was on youtube looking for a guide for flashing a BenQ with JF, and I saw this one.. This guy has an interesting method for getting the drive half open while powering with your xbox. Wouldnt this be hard on the drive? Also, its never good to pull the power plug while the xbox is on I though?

User avatar
CoFree
Robinhood
Robinhood
Posts: 13414
Joined: Wed Nov 07, 2007 1:38 pm
Location: In the Forest
Contact:

Re: Interesting BenQ Flash...

Post by CoFree »

yea
i quit when he was holding the dvd drive tray from closing after he turned the power back on.
there is no way i would do that to someone drive.
just get a ck3 and do it right
its just a matter of time before he breaks someones tray.(or a gear )

you can do the same thing by just pulling the power out of the dvd drive (the dvd drive power plug)
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
Image
No Questions by PM.
User avatar
commando_lee
Ally of Robinhood
Ally of Robinhood
Posts: 1821
Joined: Sun Apr 26, 2009 12:50 pm
Location: Up high in the tree looking out for the Sheriff of Nottingham

Re: Interesting BenQ Flash...

Post by commando_lee »

i agree a simple £27 for a ck3 & probe, replace broken drive £30 just logic realy
................................................................RobinHoods Very Own
.......................................Image
I do this for the fun and pleasure in helping people. But this is NOT my job. Post up on the boards with your question and some body will help you dont use the PM system.
User avatar
HaGGardSmurf
Ally of Robinhood
Ally of Robinhood
Posts: 4088
Joined: Tue Feb 03, 2009 9:46 am
Location: Alberta, Canada

Re: Interesting BenQ Flash...

Post by HaGGardSmurf »

I always do the power plug, but If your not paying attention, you could fry the drive (Like I did on my first flash attempt). When I was watching it, I was more or less breifly looking at what you need to do, so drive half open, what steps in JF, etc. Then I thought wait, he doesnt have a ck3, how did he get the drive half open with such little hassle.

Then I rewound, and saw what he did, I could feel the tension on the gears of the drive, it was painful to watch.
Post Reply

Return to “360 DVD Drive Flashing”