need help, benq might be bricked

The place for more technical questions about modding your Xbox 360!
Post Reply
kr4m3r
Peasant
Peasant
Posts: 2
Joined: Fri Jul 03, 2009 1:36 am

need help, benq might be bricked

Post by kr4m3r »

hello all. i am currently working on a benq that as of now gives the white screen of death. basically i have done 2 other benqs in the past successfully through jungleflasher. this one though had its firmware erased and was stuck in vendor mode for a while after a bad flash. i had deleted the ofw and cfw files (n00b mistake) and had to recover them. i was able to find different bin files with 3 different keys, counting this drive i have worked on a total of 3 so that makes since. thanks to some process of elimination i have narrowed down 3 to 2 and i have tried flashing with both keys through modified and unmodified fw. my console states that i must place the game disc in a 360 console. what i need to know is: 1. when using dosflash to flash fw does entering the correct serial number matter or is that just for the backup folder it creates on your usb drive, 2. is there a possibilty that the drive serial info (hex code) that is viewable in jf could have been corrupted when the flash messed upand if so is there a tool to verify that the drive serial info is accurate (like dsdb fixer but for benqs) and 3. could i buy a device that could read the rom chip from the 360 board and tell me what my key info was in the first place (last resort of course). thank you ahead of time for any help offered.
User avatar
HaGGardSmurf
Ally of Robinhood
Ally of Robinhood
Posts: 4088
Joined: Tue Feb 03, 2009 9:46 am
Location: Alberta, Canada

Re: need help, benq might be bricked

Post by HaGGardSmurf »

kr4m3r wrote:1. when using dosflash to flash fw does entering the correct serial number matter or is that just for the backup folder it creates on your usb drive, 2. is there a possibilty that the drive serial info (hex code) that is viewable in jf could have been corrupted when the flash messed upand if so is there a tool to verify that the drive serial info is accurate (like dsdb fixer but for benqs) and 3. could i buy a device that could read the rom chip from the 360 board and tell me what my key info was in the first place (last resort of course). thank you ahead of time for any help offered.
1: Nope, the serial is just so dosflash knows where to find the FW you want to flash. You dont even need to put numbers... It can be letters.

2: Im not quite sure, its unlikely. Someone else will have to post about this.

3: If you have the NXE dashboard, there is nothing.
kr4m3r
Peasant
Peasant
Posts: 2
Joined: Fri Jul 03, 2009 1:36 am

Re: need help, benq might be bricked

Post by kr4m3r »

that sucks. arg. so i guess that means this console is a glorified dvd player now and i will have to buy a new console (at least thats what everyone else is telling me). thanks for the help. oh and BUMP for question 2.
Post Reply

Return to “360 DVD Drive Flashing”