There have been several news reports on Xboxhacker.net of users having success in dumping the entire firmware including the important keys of the newest un-moddable Liteon DVD drives. The methods posted so far are not for the beginner so do so at your own risk. The method seem crude at the moment, no doubt some easier methods will surface shortly. Remember with that DVD key you can install any flash-able DVD drive to that once un-moddable Xbox 360. Good job to all involved !
=========================Lift pin 101 and 122 (The MT Chip)
-solder a cable to pin 100, pin 101 and one to 3,3V
-use a 2-way switch which either connects 101 to 3,3V or to 100
-put the switch into the position so that it connects 100 to 101
-power drive
-start Dosflash, it will recognize the SPI with Status x72
-if you read it out now, it will just give you a .bin full of FFFFFFFF, but that’s OK, this is how we tricked the Flash Controller to think the SPI is empty
-put the switch in the other position (so that 101 is connected to 3,3V)
-now read the flash
=========================
Well guys after reading over a few threads
it would seam that this is true
I have not tried it
Ill be wait for more info right now
In truth it dont matter till we have ixtreme firmware for them anyway
there is the rumor of a different way to dump the drive
Let hope that is more beginner friendly.
Now
i would say this after reading the threads.
It would appear that there is (at least some) unrest in the 360 hacking/modding scene.
The 360 scene has been running great for a long time and i (and others) would hate to see it turn in to the
mess that the psp and Wii scene is.
That being said
The future does lok good for ,once again be able to flash ALL 360 dvd drives.
