Need help with restoring hitachi 47 and then flashing

The place for more technical questions about modding your Xbox 360!
Post Reply
XExcellL
Peasant
Peasant
Posts: 14
Joined: Sat Jul 11, 2009 11:43 pm

Need help with restoring hitachi 47 and then flashing

Post by XExcellL »

I need help restoring hitachi 47 drive and then flashing it to play backups . I tried to flash it using toolbox 4.8 but it keep say unable to flash sectors is there another way to restore the drive and flash it.
XExcellL
Peasant
Peasant
Posts: 14
Joined: Sat Jul 11, 2009 11:43 pm

Re: Need help with restoring hitachi 47 and then flashing

Post by XExcellL »

I think I brick the drive is there a way to revive the hitachi drive ?
User avatar
HaGGardSmurf
Ally of Robinhood
Ally of Robinhood
Posts: 4088
Joined: Tue Feb 03, 2009 9:46 am
Location: Alberta, Canada

Re: Need help with restoring hitachi 47 and then flashing

Post by HaGGardSmurf »

Well with the drive in mode b, and unlocked, just click restore to stock.

Why do you think you bricked it what happened?
XExcellL
Peasant
Peasant
Posts: 14
Joined: Sat Jul 11, 2009 11:43 pm

Re: Need help with restoring hitachi 47 and then flashing

Post by XExcellL »

I tryed restoring it to stock using jungle flasher and it started freezing then after that the drive wouldnt eject and windows couldnt find the drive.
HAZ3
Bandit
Bandit
Posts: 83
Joined: Thu Jan 15, 2009 7:53 am

Re: Need help with restoring hitachi 47 and then flashing

Post by HAZ3 »

XExcellL wrote:I tryed restoring it to stock using jungle flasher and it started freezing then after that the drive wouldnt eject and windows couldnt find the drive.

the best thing for you to do is do a search for cofree's old hit drive flashing tutorial, that should get you up & running as the program he uses there will restore it to default. bear in mind though what he states in the beginning: if the drive has been flashed before you always want to restore it to stock first then flash it with the new firmware afterwards.
User avatar
lilrevuk
Ally of Robinhood
Ally of Robinhood
Posts: 842
Joined: Thu Dec 20, 2007 6:35 pm
Location: Notts. UK

Re: Need help with restoring hitachi 47 and then flashing

Post by lilrevuk »

Are you using a ck3 to power the drive? If so, I find it helps to push the mode b button (to red), even if you use jungle flasher to put it into Mode B...

If you plug the drive back in to the 360 does, the power light blink contuinually? If it does, there's a good chance the drive's firmware has corrupted.

As for recovering a dead Hitachi, it's a lot of work...

Unlike the other 360 drives, all of the hitachi's commands are within the firmware. If the flash goes wrong and you end up with a corrupt firmware, all of the basic commands to change the firmware are lost as well. Basically, a chip containing the firmware on the drive PCB has to be desoldered and re-written with your key on a programmer. I've never seen anyone advertising this sort of service...

If you were trying to flash your drive, then you must have done a dump of it first (and made a backup)??

If you have a copy of your OFW with a good key you can spoof any drive in there, and it's as easy as a few clicks in jungle flasher.

Hope you can sort things out, I've bricked a V47 of my mates while he was sat there... :oops:
Image
Image
And if at first you don't succeed..? Order the damn card! :Phttp://tekgems.com/Products/la-pci22-vt6421a.htm
Mirc is a place to chat, post up on the site for help!!!
Post Reply

Return to “360 DVD Drive Flashing”