Jungle Flasher Help! (Liteon Drive)

The place for more technical questions about modding your Xbox 360!
Post Reply
Gallows
Peasant
Peasant
Posts: 15
Joined: Mon Aug 31, 2009 5:13 pm

Jungle Flasher Help! (Liteon Drive)

Post by Gallows »

Hi,

I would like to simply use JF but my problem with it is that every time I power up the LITEON drive in windows, 30 seconds later windows just locks up on me.

I have NO VIA DRIVERS INSTALLED at all and I have installed PORTIO32 AND NET.frame 3.5. AND the USB driver.

Every thing works ok if I turn the drive on first BEFORE I boot into windows but as soon as I do the power cycle it hangs and I havent even used the erase command yet?

I only need to upgrade from Extreme 1.5 to 1.6 so as its only a simple upgrade it would be perfect on this occation to just use JF but I just carnt suz the freezing issue.

Running XP btw

Any ideas Folks
sadalius
Robinhood
Robinhood
Posts: 4039
Joined: Wed Nov 07, 2007 6:06 pm

Re: Jungle Flasher Help! (Liteon Drive)

Post by sadalius »

Have you entertained the idea of using iprep 9? It won't hang up in dos like it is in windows for you.
Sadalius

No questions by PM please
Gallows
Peasant
Peasant
Posts: 15
Joined: Mon Aug 31, 2009 5:13 pm

Re: Jungle Flasher Help! (Liteon Drive)

Post by Gallows »

The only problem there is that the tut for Iprep 9 shows how to flash buy extracting the key first, I only want to upgrade my Firmware and dont see how I can do this using Iprep 9, It would be good to see a tut for just upgrading rarther than having to extract the key again, I know I dont need to extract the key again becaue its already been flashed to Extreme 1.5.

Every time you google the PC FREEZING issue people ASSUME this is becuse you have used the Erase command, but in my case its BEFORE.. If I could stop it freezing OR find out how to use Iprep to UPGRADE to Extreme 1.6. (I still have all my original files from when I flashed it the very first time so there must be a way round it for me)

I will be having another go tonight anyway so I will be reading these forums alot:)
User avatar
commando_lee
Ally of Robinhood
Ally of Robinhood
Posts: 1821
Joined: Sun Apr 26, 2009 12:50 pm
Location: Up high in the tree looking out for the Sheriff of Nottingham

Re: Jungle Flasher Help! (Liteon Drive)

Post by commando_lee »

Gallows wrote:The only problem there is that the tut for Iprep 9 shows how to flash buy extracting the key first, I only want to upgrade my Firmware and dont see how I can do this using Iprep 9, It would be good to see a tut for just upgrading rarther than having to extract the key again, I know I dont need to extract the key again becaue its already been flashed to Extreme 1.5.

Every time you google the PC FREEZING issue people ASSUME this is becuse you have used the Erase command, but in my case its BEFORE.. If I could stop it freezing OR find out how to use Iprep to UPGRADE to Extreme 1.6. (I still have all my original files from when I flashed it the very first time so there must be a way round it for me)

I will be having another go tonight anyway so I will be reading these forums alot:)
You will need to dump the drive again if you dont have the key to hand, it dont matter that you have ixtreme already on there you still need to have the key so you can upgrade

You said that you have the original firmware just laod that into JF as your source firmware and then use 1.6 as target then click spoof to target. then follow this tut viewtopic.php?f=197&t=7041" onclick="window.open(this.href);return false;
................................................................RobinHoods Very Own
.......................................Image
I do this for the fun and pleasure in helping people. But this is NOT my job. Post up on the boards with your question and some body will help you dont use the PM system.
User avatar
HaGGardSmurf
Ally of Robinhood
Ally of Robinhood
Posts: 4088
Joined: Tue Feb 03, 2009 9:46 am
Location: Alberta, Canada

Re: Jungle Flasher Help! (Liteon Drive)

Post by HaGGardSmurf »

Its probably best to use iprep, but if you connect the drive while windows is loading (the boot screen) your likely to not freeze your comp.
calishooter
Squire
Squire
Posts: 35
Joined: Wed Jun 10, 2009 1:22 am
Location: From da WEST

Re: Jungle Flasher Help! (Liteon Drive)

Post by calishooter »

(Every thing works ok if I turn the drive on first BEFORE I boot into windows but as soon as I do the power cycle it hangs and I havent even used the erase command yet?)


It seems to me your having a power issue.If your using the the molex power from your computer,that would be the problem.Your xbox 360 drive is taking to much juice when you turn it on and it makes your hard drive act up.Try using a different power source for xbox 360 drive.
meX
BOX
djshauny1
Possible Ally of Robinhood
Possible Ally of Robinhood
Posts: 968
Joined: Fri Jul 24, 2009 6:07 am
Location: Somewhere in the forest

Re: Jungle Flasher Help! (Liteon Drive)

Post by djshauny1 »

calishooter wrote:(Every thing works ok if I turn the drive on first BEFORE I boot into windows but as soon as I do the power cycle it hangs and I havent even used the erase command yet?)


It seems to me your having a power issue.If your using the the molex power from your computer,that would be the problem.Your xbox 360 drive is taking to much juice when you turn it on and it makes your hard drive act up.Try using a different power source for xbox 360 drive.
Mine used to do the exact same thing. I got a via card and that solved my problem
Image
calishooter
Squire
Squire
Posts: 35
Joined: Wed Jun 10, 2009 1:22 am
Location: From da WEST

Re: Jungle Flasher Help! (Liteon Drive)

Post by calishooter »

Just like djshauny1 says,if you dont have a via sata card you should get one and that might solve all your problems!
meX
BOX
Post Reply

Return to “360 DVD Drive Flashing”