Robin Hoods Playground

technoe wrote:I would try a different port, or maybe reformatting and retrying.

I ended up just copying and pasting all the files from the 20gb to the 120gb.It worked just fine.

I bought a Wd Scorpio 120gb HDD BEVS for my son a few months ago and was able to get it to work just fine and get all his saves on it.For some stupid reason,I am having trouble with a BEVT model.I bought this one for me,flashed it with no problems, and formatted it in the 360.I made a backup image o...

If they are both BenQ's,just open the drives up and swap boards.No need to flash.

Worked perfect on my MS28 and only took about 30 seconds from start to finish.

Then there's a chance that the 0800 mode in iXtreme 1.6 doesn't work the same way as the old 0800 firmware. Try flashing your drive with the Toshiba-Samsung Xtreme package 0800 firmware found on Xbins. Dont you need to enable 0800? I thought you need to open the tray half way, then power it, and it...

Technoe is right, your bytes are incorrect. Your drive has not been unlocked. Have you ever ripped a game before? Check this tutorial for the settings: http://robinhoodsplayground.com/forum/viewtopic.php?f=198&t=113" onclick="window.open(this.href);return false; This is my first attem...

technoe wrote:For some reason the Bytes Used: is wrong, it's most likely a data transfer error between the drive and XBC, try using Schtrom 360, and see if you get the same or similar error.

I did try Schtrom about an hour ago and still got error messages at 3%.

Which drive are you using, I'm assuming you're using XBC to do the dumping. Right now XBC doesn't support the lite-ons. And to get the drive in 0800 mode it must be powered up with the drive half-way ejected. Also make sure you go to the dvd drive tab and unlock the drive before trying to "rea...

I flashed my drive to 1.6 and when I try to rip a game to my pc,I keep getting this error message at 3.39%: Invalid security sector detected. Unlocking Game Partition Checking Game Partition Availability Xtreme style game partition is not available Getting media info [F] Media Type: DVD-ROM Bytes Us...

technoe wrote:Yep use the benq firmware just make sure you use the sammy key. Did you save a copy of the 1.51 spoofed firmware, if so just load that as source, then the 1.6 as target and Spoof Source to Target, then write.

I have the original spoofed BenQ bin and the original factory bin.

technoe wrote:Exactly, do it the same way as before just use 1.6

So even though I spoofed it to look like an MS28,I still flash it like a BenQ,right?Thank you

I replaced an MS28 with a spoofed BenQ.The BenQ is at firmware 1.51.How should I flash it to 1.6 being that it's spoofed?Should I just follow the tutorial for BenQ 1.51 using jungle flasher but use firmware 1.6?